What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
Last Updated: 19.06.2025 00:19

This is where this question deviates from being a 'generic' question, and becomes more specific.
But it can get overloaded, and no longer works.
This one hit behind the barn.
Why is the band Nickelback unliked so much?
Because the load is inductive, the current lags the voltage.(by a bit).
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
One
So, the voltage could go up to 500 volts, and the fuse will not open up.
At least they know the answer if they wanted it.
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
Why should we share our wife with others?
The other is “what does a “fuse” do?”
A circuit breaker is similar, but is resettable.
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
Can you share some of your favorite jokes that are not well-known but always make people laugh?
He then describes Rainy Season and Lightning.
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
At one ohm, the resistor has a maximum of 1 watt power.
Should Pete Rose's record as the all-time hits leader be recognized and celebrated?
This is the picture of an electronic coil of wire wound around a core of magnetic material.
2024–10–10[John johnson John Johnson ]
Can the fuse protect the electronic devices from lightning instead of a surge protector.
As a teacher, what's the most inappropriate experience you've had with a student?
Upvotes:
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
the problem then depends on "how fast does the fuse operate?".
How do you perform a lap dance for your boyfriend or husband?
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
One is “what exactly is in a ‘surge protector’ ? ”
I post the exact comment here.
After 70 years of the crappiest computers ever made, why does IBM exist?
what exactly is a ‘surge’ protector?
First Sentence:
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
How did you react when your doctor ordered a colonoscopy?
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
A fuse is a non-resetable over current circuit protector.
Did you become a cuckold for your wife?
The bolt then partially travels down the line to your home.
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
2024–10–16 [ OO OLAOYE OYEBODE ]
If Trump were to lose in 2024, would that be the end of his grip on the Republican Party?
But… the neutral is now “floating” because of the 1 ohm resistance.
The third is lightning and “how it gets conducted into a home.”
An AC voltage/ current source, and an ac inductive load.
What will the legacy of Jimmy Carter be in light of his death today at 100?
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
Edit 2024–10.
It also is a device that limits the change in current flow.
He then describes the function of a fuse.
There are three different concepts here that are getting confused.
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
For this case there are devices called Metal oxide varistors (MOV).
nine
Here is a simplified AC power diagram.
What is lightning?
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
2024–10–14 [Omar Gharbi Omar Gharbi ]
The MOV will conduct when the voltage exceeds 50% of line voltage.
Now when you have a certain ac resistance, then a current flows in a loop.
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
This is where the MOV conducts again, and dissipated the energy.
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
It seems Mohan does not understand the difference between a comment and an Answer.
[old diagram got deleted by accident]
[image of Common-mode choke]
He then asserts :
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
eight
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
This device then solves the entire problem.
Barnstars:
so, what happens?
This is 'the assistant's answer'
but I think this circuit , shows a few more pieces.
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
a photo is worth a thousand words.
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
In schematic diagrams this is the symbol for a fuse:
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
These are simplified answers to the original question, and does not change anything I wrote above.
(Dc diagram shown, AC is similar).
There are two important concepts here.
What does a fuse do?
but this device (an Inductor) … impedes the rapid changes in the current.
These devices are installed between the “hot” and “neutral” and protective ground.
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.